Harness and Container $2650
Fully Loaded $2999
Container highlights
- The main riser covers have been designed for better holding power
- The backpad is shaped and contoured to fit the shoulders and upper body and stay in place
Harness highlights
- V-Flex leg straps stay firmly in place and provides superior comfort under canopy
- The “Multi-Flex” harness configuration with chest and hip rings allows for maximum comfort and flexibility
The Container
The Talon FS container system is a highly refined “box” configuration. RI has taken the heart of the Voodoo container, the reserve system, and merged it with a better box design for the main.
The containers are narrower and shorter than the Talon for comparable size canopies. We use the same reserve container configuration as the Voodoo with the same protector flap.
The main utilizes the same upward closing flap as the Voodoo. We increased the plastic stiffener thickness to help flatten the flap out. The main side flaps incorporate the wrap around bottom design that provides for a better bridle protector as well as a natural POP mount.
The main riser covers have been designed for better holding power and allow for the main risers to be stowed in any manner with no effect on deployment. A side note is that these covers worked so well, that they have been merged into the Voodoo design. They hold better, are smoother looking, and result in better over the shoulder comfort.
The backpad is shaped and contoured to fit the shoulders and upper body and stay in place.
The center flap stripe options are similar to those utilized on the Talon 2 for those who prefer more conservative design choices.
The Harness
The harness was taken directly from the Voodoo design. Sandy Reid is the inventor and patent holder for the articulated harness. He has already thought of and tested all the different designs currently used by other companies for their articulated harnesses and has discarded them in favor of the configuration currently used for the Talon FS and Voodoo.
“V-flex” leg strap configuration is simply the best and most comfortable yet designed. The leg straps stay in place without the use of “suspenders” and “bungees” that others rely on. The “Multi-Flex” harness configuration with chest and hip rings allows for maximum comfort and flexibility. The chest rings allow for the yoke to be worn straight down from of the chest, which in turn relieves pressure on the outside of the shoulders. This allows for maximum upward reach.
We have designed our own version of the “cut-in backstrap” which we have named the “In-Set" backstrap. The use of the hip ring oriented from the horizontal and coupled with a comfort pad, results in unparalled stabilization of the container to the back and maximum comfort.
The main risers utilize a new Velcroless toggle design that is flatter and more secure than in the past.
The TSO identification is located on the backpad, in the pullup cord pocket. Insert hand into the pocket and pull upward. The serial number, container size and date of manufacture are located on this label.
RI Harness Label
All RI harnesses are identified with the date of manufacture and serial number located on the inside right rear reserve riser.
Optimum 99/106 | Pilot 104 |
||
Optimum 113/126 Smart 110/129 | Sabre 2 120 Spectre 120 Venegance 107 Pilot 117 Crossfire 109 |
||
Optimum 143 Smart 120 | Sabre 2 120 Spectre 135 Venegance 107 Pilot 117 Crossfire 119 |
||
Smart 135 | Sabre 2 135 Spectre 150 Pilot 132 Crossfire 129/139 |
||
Smart 150 | Sabre 2 150 Spectre 170 Pilot 150 Crossfire 149 |
||
Smart 175 | Sabre 2 170 Pilot 168 |
||
Smart 175 |
Sabre 2 190 Pilot 188 |
||
Smart 175 |
Pilot 210 |
||
Smart 250 |