Talon Classic

Compliance with this service bulletin may be done according to procedures outlined in Rigging Innovations PRODUCT MODIFICATION PROCEDURE #1203. However, only Rigging Innovations Inc. or authorized facilities/individuals may carry out the necessary modifications. Authorization to do so must be obtained IN WRITING from Rigging Innovations Inc.

Owners desiring this modification should contact Rigging Innovations direct to make the necessary arrangements. The modifications will be done on a no charge basis for the owner.

See service bulletin file for more information

If the RSL lanyard does not fit properly, check the length against the chart for proper mating/compatibility.

See the service bulletin file for more information.

Any or all of the above upgrades may be available to the original Talon and Talon Classic designs. These may be accomplished either at the factory or an Authorized RI Service Center.

See the service bulletin file for more information.

All users of an Aviacom Argus equipped Rigging Innovations harness and container system should remove the Argus AAD from their system, prior to making ANY further jumps with the system.

See the service bulletin file for more information.

RI harness and container systems listed in the service bulletin may be assembled with the MarS M2, by a certificated and appropriately ratedFAA master or senior parachute rigger or foreign equivalent.